香港寵物小精靈村落論壇

標題: ID卡製造方法教學(英文) [打印本頁]

作者: ryanlast 時間: 1/8/2009 02:12 PM
標題: ID卡製造方法教學(英文)
ID卡製造方法教學(英文)
The first thing you need to do is to find a template. There are lots of different templates, but for now, just click here and choose one. For this tutorial, we will use this template.

登錄/註冊後可看大圖

Now, we need to right-click the template and click copy. Now open up Paint, or MS Paint.

登錄/註冊後可看大圖

This will get rid of the white outline around the image. Now press Ctrl†V or go to Edit then click Paste on the top toolbar to paste your template.

登錄/註冊後可看大圖

Step Two
Adding Pokemon
Now, you may want to zoom-in for this, so select the zoom-in tool and click your template.

登錄/註冊後可看大圖

Now that we're zoomed in, it's time to add our Pokemon. Select one of the squares (making sure you select the border too) and copy it (use Ctrl†C or Edit then Copy on the toolbar).

登錄/註冊後可看大圖

Now, paste the square below the template. Select the inside of the square (not the border) and press delete. You should now have a white space where the Pokemon will go.

登錄/註冊後可看大圖

Now, copy and paste the white box five times, so that we have one for each of the six Pokemon.

登錄/註冊後可看大圖

Now, choose your six Pokemon sprites. Click here for the links to Pokemon sprites. Right click the sprite you want, copy it, and then paste it onto Paint/MS Paint.

登錄/註冊後可看大圖

Now, grab one of the boxes and move it over the Pokemon.

登錄/註冊後可看大圖

Now, delete everything outside the box.

登錄/註冊後可看大圖

Now, select the Pokemon in the box and put it back onto the template. Make sure you line it up correctly.

登錄/註冊後可看大圖

Now, repeat those steps for the other five Pokemon!

登錄/註冊後可看大圖

Step Three
Adding badges This is one of the easier steps. All you do is copy one of the following badge sets.
Kanto:

登錄/註冊後可看大圖

Johto:

登錄/註冊後可看大圖

Hoenn:

登錄/註冊後可看大圖

Sinnoh:

登錄/註冊後可看大圖

Orange Islands:

登錄/註冊後可看大圖

Silver Battle Frontier Symbols:

登錄/註冊後可看大圖

Gold Battle Frontier Symbols:

登錄/註冊後可看大圖

（華麗大賽及pokemon ranger的徽章在帖尾）
Now, paste the badge set onto MS Paint/Paint. Select it, and place it on top of the area where the badges go. Try to line it up correctly.

登錄/註冊後可看大圖

Step Four
Adding a Trainer Click here for links to trainer sprites. Choose the trainer you want and copy and paste it straight onto the template, like so.

登錄/註冊後可看大圖

Easy, see!Step Five
Adding text Click the "A" tool to add text. Click where you want the text to go. You can choose whatever type of font you like, but I like to use Verdana, size 10.

登錄/註冊後可看大圖

Step Six
Saving and Uploading Now that your trainer card is finished, you can move it to the corner of the page.

登錄/註冊後可看大圖

Now, using the point (highlighted in red) move the edge of the canvas so that it just surrounds the trainer card, like this...

登錄/註冊後可看大圖

Now, saving the image. To get the best quality image, you should save your trainer card as a .PNG (highlighted here in red).

登錄/註冊後可看大圖

And there you go, your very own trainer card! Now all you have to do is upload it. If you don't know where to upload it, try http://www.tinypic.com. Uploading on http://www.tinypic.com First, go to http://www.tinypic.com. Then click Browse (highlighted in red below).